Inverter NIDEC

Inverter NIDEC

ข้อดีของอินเวอร์เตอร์ นิเดค

  • มีรุ่นตั้งแต่ 0.25 kW to 132 kW (0.33 HP to 200 HP)

  • มีศูนย์ส่งซ่อมในไทย ด้วยมาตรฐานเดียวกันกับที่อังกฤษ

  • รับประกัน 5 ปี

  • ขนาดตัวที่เล็ก ทำให้สามารถวางเครื่องติดกันได้ ทำให้ประหยัดเนื้อที่ในการติดตั้ง

  • Communication หลากหลายใก้เลือกใช้ตรงกับความต้องการ

  • มีโปรแกรมสำหรับการเซ็ทค่าพารามิเตอร์ ผ่านคอมพิวเตอร์ และสามารถเช็คการแก้ไขค่าก่อนหน้าได้ด้วย ว่ามีคนมากดเปลี่ยนค่าจากที่เราเซ็ทไว้หรือไม่

ข้อดีของการใช้อุปกรณ์ปรับความเร็วรอบมอเตอร์

  • การสตาร์ทที่นุ่มนวล (Soft Start)

  • ลดการกระชากของกระแส (Inrush Current)

  • สามารถปรับอัตราเร่งและอัตราหน่วงได้ (Adjustable Acceleration and Deceleration Time)

  • ประหยัดพลังงาน (Energy Saving)

  • ลดค่าใช้จ่ายในการซ่อมบำรุง (Reduce Maintenance Cost)

Specifications

Environment

Ambient
Operating
Temperature

Size 1 - 4: -20°C to 40°C (-4°F to 104°F) @ 3 kHz switching freq. | Operation to 60°C (140°F) with de-rating

Size 5 - 9: -20°C to 40°C (-4°F to 104°F) @ 3 kHz switching freq. | Operation to 55°C (131°F) with de-rating

Cooling method

Forced convection

Humidity

 95 % non-condensing at 40 oC (104 oF)

Storage

Temperature

Size 1 - 4: -40°C to 60°C (-40°F to 140°F) — 24 months Max.

Size 5 - 9: -40°C to 55°C (-40°F to 131°F)
— 24 months Max.

Altitude

De-rate the continuous output current by 1% for every 100 m (328 ft) above 1000 m (3,280 ft) to a maximum of 3000 m (9,840 ft)

Vibration 

Tested in accordance with IEC 60068-2-64 and IEC 60068-2-6

Mechanical Shock 

Tested in accordance with IEC 60068-2-27 and IEC 60068-2-29

Enclosure Rating

IP20, NEMA 1 conduit kits available

Electromagnetic
Capability

IEC/ EN 61800-3 Immunity and Emissions

EN 61000-6-2: Immunity for industrial environments

EN 61000-6-4: Emissions for industrial environments

EN 61000-3-2: Harmonic current emissions An EMC data sheet is available on request

RoHS

Complies with the Restriction of Hazardous Substances Directive (2011/65/EU)

     

AC Supply Requirements

Voltage

100 V models: 100 to 120 Vac ±10%
200 V models: 200 to 240 Vac ±10%
400 V models: 380 to 480 Vac ±10%

Phases

1Ø and 3Ø (Model dependent)

Maximum Supply
Imbalance

2% negative phase sequence, 3% voltage imbalance
between phases

Input Frequency

45 to 66 Hz

Input Displacement
Power Factor

0.97

Switching
Frequency

Size 1 - 4: 0.667, 1, 2, 3, 4, 6, 8 12 & 16 kHz

Size 5 - 9: 2, 3, 4, 6, 8 12 & 16 kHz

Output Frequency
Range

0 to 550 Hz

Frequency
Accuracy

±0.02% of full scale

Frequency
Resolution

0.01 Hz

Analog Input
Resolution

Voltage mode: 11 bits (unipolar) Current mode: 11 bits

Braking

Dynamic braking transistor included, requires external resistor

 

Protection

DC Bus Undervoltage
Trip

100 V models: 175 Vdc
200 V models: 175 Vdc
400 V models: 330 Vdc

DC Bus Overvoltage Trip
Humidity

Frame sizes 1 - 4:
100 V models: 510 Vdc
200 V models: 510 Vdc
400V models: 870 Vdc

Frame size 5 - 9:
200V models: 415 Vdc
400 V models: 830 Vdc

Drive Overload Trip

Programmable: Default settings: 180% for 3s, 150% for 60s

Instantaneous
Overcurrent Trip

220% of rated motor current

Phase Loss Trip

DC bus ripple threshold exceeded

Over-temperature Trip

Drive heatsink temperature exceeds 95°C (203°F)

Short Circuit Trip

Protects against output phase-to-phase fault

Ground Fault Trip

Protects against output phase-to-ground fault

Motor Thermal Trip

Electronically protects the motor from overheating due to loading conditions

     

Approval & Listings

UL, cUL

 UL file NMMS/8: E171230

CE

CE approval

EU

These products comply with the Restriction of Hazardous Substances Directive (2011/65/EU), the Low Voltage Directive (2014/35/EU) and the Electromagnetic Compatibility Directive,
(2014/30/EU).

RCM

RCM Registered supplier No. 12003815281

ISO

Manufacturing facilities comply with ISO 9001:2015 and ISO 14001

TÜV

C300 models only: The Safe Torque Off (STO) function may be used as a safety component of a machine.

Type examination certificates by TÜV Rheinland:

Frame sizes 1 - 4: No. 01/205/5383.03/18

Frame sizes 5 - 9: No. 01/205/5387.02/18

Functional safety parameters:

EN ISO 13849-1 - Cat 4, PLe

EN61800-5-2/EN62061/IEC 61508 - SIL 3

UL functional safety approval: FSPC E171230

EAC

RU C-GB.HA10.B.01062

 

 

สนใจติดต่อสอบถาม บริษัท แสงชัยมิเตอร์ จำกัด

ให้บริการด้วยประสบการณ์กว่า 50 ปี

มากประสบการณ์

ให้บริการด้วยประสบการณ์กว่า 60 ปี

สินค้าคุณภาพ

มากกว่า 10,000 รายการ

รางวัลธรรมาภิบาลดีเด่นแห่งปี 2553

บริการด้วยใจ

รางวัลธรรมาภิบาลดีเด่นแห่งปี 2553

Call Center: 02-299-3333

ตั้งแต่วันจันทร์ - ศุกร์ เวลา 8.30-17.30 น. และวันเสาร์ เวลา 8.30 - 15.30 น.

กรุณาเข้าสู่ระบบหรือ สมัครเป็นสมาชิกของเรา

สมาชิกสามารถดาวน์โหลดคู่มือการใช้งาน และ Software ที่จำเป็นสำหรับการใช้งานตัวเครื่อง รวมถึงได้รับความสะดวกสบายในการขอใบเสนอราคา คุณสามารถ:

ลืมรหัสผ่าน?

สินค้าในใบเสนอราคาของคุณ

คุณยังไม่ได้เลือกใส่สินค้า
ในใบเสนอราคาของคุณ